Planet Technology ADSL 2/2+ Router with USB Port ADE-3410v2 - Manual (Page 11)

USB Installation
To connect the DSL router to the PC’s USB port, perform the following:
z Connect the USB cable to the USB port on the DSL router. The cable has two
different connectors; you may have to try both connectors.
z Connect the other end of the USB cable into the PC’s USB port.
2.3 Router Parameters Setting
Configuring computer network card IP address
Configure your network card’s TCP/IP properties to Obtain an IP address automatically
from router, or set the computer’s IP with the same network mask of the router (For
example: router’s IP is 192.168.1.1 / 255.255.255.0).
Then you can set computer’s IP to:
192.168.1.x / 255.255.255.0.
The range for x is from 3 to 253
Web setting interface
Open IE or Netscape Web browser, Input http://192.168.1.1(Router default IP address) in
the address column, then click button, access the following setting interface:
Input user name and password, then click Login key to enter WEB setting interface.
Default setting:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Username / Password: admin / admin
Main interface
After type right user name and password, the following window will pop up:
11