Panasonic KX-TG5438 - Manual (Page 34)

Programmable Settings
34 For assistance, please call 1-800-211-PANA (7262).
*1 Can be used to activate Caller IQ. See
the leaflet included with this unit for
more information.
*2 “Activate CIQ?” is displayed if you
have not subscribed to openLCR
service. “Turn CIQ on?” is displayed
when Caller IQ is turned off. See the
leaflet included with this unit for more
information.
*3 If you program these settings using one
of the handsets, you will not need to
program the same item using the other
handset (KX-TG5439 only).
*4 KX-TG5439 only
Note:
L
To exit programming, press {OFF} at
any time.
L
To go back to the previous menu, press
{
<} or {Back}, or press {>} or {Select}
while “(Go back)” is displayed.
Ringer settings
Handset ringer volume
4 levels (high/medium/low/off) are
available. The default setting is HIGH.
1
Press {MENU}.
2
Scroll to “Ringer setting” by
pressing {V} or {^}, then press {
>}.
3
Scroll to “Ringer volume” by pressing
{V}
or {^}, then press { >}.
4
Press {V} or {^} repeatedly to select
the desired volume.
L
To turn the ringer off, press {V}
repeatedly until “Off ?” is displayed.
5
Press {Save}.
Note:
L When the ringer volume is set to off, the
handset will display “Ringer off”, and
will not ring for outside calls. The
handset will ring at the low level for
intercom calls.
Ringer setting
Ringer volume
Ringer volume
Low |||||| High
KBack dB SaveL
TG5438_5439.book Page 34 Tuesday, January 11, 2005 4:46 PM