beautypg.com

Clock/timer operations – Philips FWD570 User Manual

Page 41

background image

41

English

Clock/Timer Operations

Viewing the clock

The clock (if it is set) will be shown in Standby
mode. Press CLOCK on the system to view
clock in any source mode (or press

CLOCK/

TIMER on the remote control).

Press

DISPLAY on the system to select 12-

hour or 24-hour mode.

If the clock has not been set, “--:--“ will blink

until you set the clock.

Setting the clock - see page 19.

Setting the timer

The system can switch to DISC, TUNER, TAPE
mode automatically at a preset time, serving as
an alarm to wake you up.

IMPORTANT !
– Before setting the timer, ensure that
the clock is set correctly.
– The timer will always be switched on
once set.
– The timer will not start if a recording
is in progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
– The time can be set in 24-hour mode.

1

Press and hold

TIMER or CLOCK/TIMER for

more than 3 seconds,

TIMER will start to flash.

The selected source will be displayed.

2

Press

DISC, TUNER or TAPE (1/2) to select

timer mode. The corresponding source will
appear on the display.

DISC - load the disc.
TUNER - Tune to the desired radio station.
TAPE 1 - Load the prerecorded tape into tape
deck 1.

3

Press O or P on the system or remote control
to set hours .

4

Press

1 or ¡ on the system or remote

control to set the minutes.

5

Press

TIMER or CLOCK/TIMER to store the

setting.

TIMER ON” will be displayed for 3 seconds.

The timer will start to work.

The timer will always be switched on once it

has been set.