beautypg.com

Timer recording (cont’d) 29 – Philips DVP3050V/37 User Manual

Page 29

background image

English

Timer Recording (cont’d)

29

If you are recording from other equipment, select L

1 or

L2.To determine L

1 or L2, refer to the Helpful Hints.

If you are using a Cable Box/Satellite Receiver, select the

Cable Box/Satellite Receiver output channel (03 or 04).
Then, at the Cable Box/Satellite Receiver, select the
channel you want to record. Leave the Cable
Box/Satellite Receiver on for the timer recording.
Details are on page 10.

9

Press K or L to select a recording tape speed. The arrow
will appear beside your choice.The selected speed will flash
beside REC SPEED. Details about tape speed are on page 60.

• To stop a started timer recording,

press STOP/EJECT C A (VCR) on
the front of the DVD/VCR. (You
cannot stop a started timer
recording with STOP C on the
remote.) More Helpful Hints are
on page 62
.

• To change incorrect information,

press

s

or

B

to choose the

item you want to change. Press
K

or L to adjust the

information.

While a timer recording is set

and “

” is on, pressing

STOP/EJECT C

A

(VCR) will

turn on the DVD/VCR and/or
cancel the timer recording.The

” will disappear. Press

STOP/EJECT C

A

(VCR) again to

remove the tape. Insert a tape
and press TIMER SET to reset
the timer recording.

• If there is no tape in the VCR

when you press TIMER SET,

” will flash. Insert a tape.

• If one or more Timer recordings

are on standby when one timer
recording ends, the DVD/VCR
will turn off automatically and

” will appear on the

DVD/VCR's display panel
indicating that it is now ready for
another timer recording.

Helpful Hints

PROGRAM NUMBER 1
DATE

0 5 / 0 4 WED

START TIME

0 7 : 3 0 P M

END TIME

0 8 : 3 0 P M

CHANNEL 16
REC SPEED

S P

B SP

SLP

ONE TIME PROGRAM

10

Press CLEAR/RESET to store the timer recording.

11

Press TIMER SET. The DVD/VCR will turn off and “

” will

appear in the display panel. In some cases, the DVD/VCR will
switch to DVD mode instead.You may use the DVD Player
during a timer recording.
If you want to use the VCR until time for the recording, don’t
press TIMER SET until a few minutes before the recording
should start. Or, press TIMER SET only when you know you
won’t be using the VCR anymore (until after the recording).
When “

” appears, you cannot put the DVD/VCR in VCR

mode by pressing VCR or SOURCE.You must first press TIMER
SET to cancel the timer recording temporarily.Then, you can
use the VCR features again.

When a timer recording ends
The DVD/VCR will turn off and “

” on the DVD/VCR's display panel

will flash indicating that the recording is complete. Or it may switch to
DVD mode automatically. Press TIMER SETto use the DVD/VCR as usual.

Cancelling Timer Recordings

1

Press VCR, then press DISC/VCR MENU so MENU
appears.

2

Press K or L to select TIMER PROGRAMMING,
then press
B.

3

Press K or L to find the program you want to
cancel.

4

While the program number is flashing, press s to
clear all the information for that program.

5

Press CLEAR/RESET to remove the menu.

STANDBY-ON

PLAY

DVD

VCR

VCR/TV

OK

MENU

MENU

DISC/VCR

RETURN

TITLE

A-B

CLEAR/RESET SLOW

SUBTITLE

ZOOM

ANGLE

REPEAT

REPEAT

AUDIO

SEARCH

MODE

DISPLAY

SKIP / CH

SYSTEM

PAUSE

STOP

MARKER

RECORD

TIMER SET

SPEED

1

2

3

7

6

5

4

8

9

0

+10

9

10

11

H9820UD_IB_EN_1_0210 2/14/05 11:16 AM Page 29