Channel setup 2 1 – Philips DVP3050V/37 User Manual

Page 21

Adding/Deleting Channels

You may want to add or delete TV channels if your channel lineup
changes or if you no longer watch some channels.

Follow the steps

1-2 above.

Press K or L to select MANUAL SET UP.
Then press B.

Press K or L until the channel number you
want to add or delete appears on the screen.

Press s or B so ADD or DELETE flashes on the
screen.

While your choice is flashing, press CLEAR/RESET.
The channel you added or deleted will be the current
channel. Added channels are available when you flip through
channels using SKIP

∑/CH K and SKIP w/ CH L.You still

can select deleted channels with the Number buttons.

2-4

STANDBY-ON

PLAY

DVD

VCR

VCR/TV

DISC/VCR

RETURN

TITLE

A-B

CLEAR/RESET SLOW

SUBTITLE

ZOOM

ANGLE

REPEAT

AUDIO

MODE

DISPLAY

SKIP / CH

SYSTEM

PAUSE

STOP

MARKER

RECORD

TIMER SET

SPEED

CHANNEL 30 (CATV)

ADD

MANUAL SET UP

Channel Setup 2

- M E N U -

TIMER PROGRAMMING
AUTO REPEAT

[OFF]

CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO

[ON]

SAP

• You cannot program channels if

you are using a Cable Box or
Satellite Receiver.

• If you have an antenna, channels

2-69 will be possible. If you have
Cable TV, channels

1-125 will be

possible.

• To stop Channel Setup, press

DISC/VCR MENU while AUTO
SET UP is flashing.

Helpful Hints

Although your DVD/VCR may automatically memorize the
channels you receive when you turn it on for the first time, you
can set up the channels again.

Press VCR, then press DISC/VCR MENU so MENU
appears. If the clock has never been set, the CLOCK SET
menu may appear when you press DISC/VCR MENU. If so,
follow the instructions from step 3 on page 22.

Press K or L to select CHANNEL SET UP.
Then, press B.

Press K or L to select AUTO SET UP.
Then press B.

AUTO SET UP will flash while the DVD/VCR sets up the
available channels.When setup is complete, the lowest available
channel will appear on the TV.
Now when you press SKIP

∑

∑/CH K

SKIP

w/CH L

, you will scan only through available channels.

You still can select any channel using the Number buttons.

2-3