Setup menu options – Philips DVDR3512V User Manual
Page 54
English
54
Setup Menu Options
(continued)
General settings
(underlined options are the factory default settings)
Screen Saver
The screen saver prevents damage to the TV screen by avoiding
exposure to a static image for too long.
{ On }
– Switches to TV screen saver mode when
playback has been stopped or paused for
more than 15 minutes.
{ Off }
– Turns off the screen saver function.
Country
Select the country of your area for auto channel tuning.
(See section “Step 3: Installation and Setup - Select the country of
your residence”).
Video Output
Selection
Select the type of video output that matches the video connection
between this recorder and your TV.
{
SCART RGB
} – For SCART connection.
{
YUV Interlaced
} – For component video connection.
{
YUV Progressive
} – For component video connection to
progressive
scan
TV.
Note: Video output setting is not required for S-Video or Composite
(CVBS) video connection.
Restore Factory
Settings
Restore all the settings of this recorder, except for the PIN code.
Restore Factory Settings can only be changed when there
is no disc in the disc tray.
1) Press OK to confi rm the default restore.
2) A warning message will appear. Select
OK
in the menu to
proceed or
CANCEL
to abort, then press OK to confi rm.
DVDR3510V_eng_26244.indd 54
DVDR3510V_eng_26244.indd 54
2007-08-01 1:46:23 PM
2007-08-01 1:46:23 PM