beautypg.com

Recording, Instant time-off recording, Watching disc playback during vcr recording – Philips DVDR3512V User Manual

Page 29: Watching another source during recording, Scart

background image

English

29

Recording

(continued)

Instant time-off recording

This function allows you to make a
recording with a preset length easily
without using the timer programming.

A

Press P +- to select the programme

number to record from, for example
‘P01’.

B

Press DVD or VCR to select the

destination of recording.

C

Insert a recordable DVD or VHS tape

into the recorder.

For VHS tape, locate the start point

position for recording.

D

If necessary, press REC MODE

repeatedly to select another recording
mode.

E

Press REC z to start recording.

To increase recording time in 30 minute
increments, press REC z repeatedly.

F

The recorder will stop recording at the

designated end time and switch to
standby mode automatically.

If you wish to stop the recording before

the scheduled time, press STOP x.

Watching disc playback
during VCR recording

If you wish to watch the DVD playback
during the VCR recording, press DVD to
switch to DVD mode and perform the
DVD playback.

Note: This function is possible if the
{ Decoder } option is set to { Off }. See
the chapter “Setup Menu Options –
Channel Setup Settings – { Modify
Channel Information
}”.

Watching another source
during recording

During recording, watch another TV
channel or playback from another audio/
video device which is connected to this
recorder.

SCART

SCART

Watching playback from another
device

This is only possible if the recorder is
connected to the TV using the EXT1 TO
TV-I/O socket.

Press SCART to view the picture from

the device which is connected to the
EXT2 AUX-I/O socket of this DVD
recorder.

Watching another TV channel

If there is no device connected to the
EXT2 AUX-I/O socket, press SCART to
switch to TV mode.

Use the TV’s remote control to change

the channels.

The message “TV/LOOP” will be

displayed on the recorder’s system
display panel.

To switch back to recorder mode, press

SCART on the remote control.

Helpful Hint:
– If you want to watch the TV channel
through the recorder or playback the
recorded disc, switch the TV back to its video
input channel.

TIPS: Ensure that there is suffi cient space available on the recordable DVD or VHS tape before

recording. You have to fi nalise the DVD±R before it can be playback on other players.

DVDR3510V_eng_26244.indd 29

DVDR3510V_eng_26244.indd 29

2007-08-01 1:46:18 PM

2007-08-01 1:46:18 PM

This manual is related to the following products: