Pentax Optio S4 - Manual (Page 16)

14
Viewing Images on a Macintosh
You can use the provided USB cable (I-USB7) or a card reader to
transfer your digital camera’s images to the PC, and you can edit and
print your images using the image viewing software. Here, the
method for viewing images with the provided software (S-SW14) is
explained.
The following software is included in the CD-ROM (S-SW14) provided.
• Image viewing / editing software (ACDSee™)
• OS: Mac OS 9.0 or higher
(requires QuickTime 6.0 or higher)
• CPU: PowerPC 266MHz or higher
• Memory: 8MB minimum
• Hard Disk space: 6MB minimum
• USB port must be standard equipment
Install the required software as follows.
1
Turn on your Macintosh.
2
Insert the CD-ROM (S-SW14)
into your Mac’s CD-ROM drive.
3
Double click the [CD-ROM (S-
SW14)].
The title screen will appear on your
desktop.
Software Provided
System Requirements
We recommend using the AC Adapter D-AC8 when connecting your
camera to your PC. Your image data could be corrupted if your
battery run out during image transfer.
Installing the Software