Planar PR Line PR5022 - Manual (Page 37)

DLP
®
Projector – User’s Manual
Config Menu
Press the Menu button to open the Main menu. Press the cursor button to move to the Config
menu. Press the cursor button to move up and down in the Config menu. Press to change
values for settings, and then press Enter or to confirm the new setting.
Item Description Default
Blank
Screen Press the cursor button to select a background color for the
blank screen. (Range: Black – Red – Green – Blue – White)
Blue
Auto Source Press the cursor button to enable or disable automatic source
detection. (Range: On – Off)
On
Auto Power
Off Press the cursor button to enable or disable automatic shut-
down of lamp after 10 minutes of inactivity. (Range: On – Off)
Off
Volume Press the cursor button to adjust the audio volume level.
(Range: 0 - 8)
4
Menu
Position Press the cursor button to position the OSD on screen.
(Range: Left – Right – Center – Down – Up)
Center
Menu Dis-
play Press the cursor button to determine the timeout delay of the
OSD.
(Range: 10 – 20 sec.)
15
Translucent
Menu Press the cursor button to set menu screen translucency.
(Range: 0% – 100%)
0%
Reset Resets all Config items to default values
Note:
The Config menu functions are available to all video sources.
– 29 –