Planet Technology WAP-4030 - Manual (Page 12)

8
Please make sure your wireless stations use the same security function.
Parameters Description
WPA Mode Disabled: Disable WPA-PSK
WPA-PSK: Enable WPA-PSK
Data Encryption There are two encryption methods selectable: TKIP and AES. Please make sure
all wireless clients are using identical encryption method.
Pass Phrase The Pre-shared key is used to authenticate and encrypt data transmitted in the
wireless network. Fill the text box by following the rules below.
Hex code: input 64-digit Hex values (in the “A-F”, “a-f” and “0-9” range) or at least
8 characters pass phrase as the pre-shared keys.
WEP Encryption Not Required: Disable WEP.
Required: Enable WEP.
Accept Authentication
Type
There are two authentication types: “Open System” and “Shared Key”. When you
select “Open System”, wireless stations can associate with this access point
without WEP encryption. When you select “Shared Key”, you should also setup
WEP key in the “Key Value” and wireless stations should use WEP encryption in