PYLE Audio PT-690A - Manual (Page 12)

11
FRONT PANEL INFORMATION
POWER
STANDBY
PHONES
M UT E
WOOFER
ON/ OFF DIM M ER
DIGITA L
IN
SU RROU ND M ODE STER EO PROLOGIC
DTS /
DOLBY DIGITAL
AV3 IN
OPTIC AL S-VIDEO VIDEO A UDIO
INPUT SELECTOR
DOLBY DIGITAL/DTS AV RECEIVER PT-690A
MASTER VOLUME
L R
ON OFF
1 2 3 4 5 8 6 7 9
21 20 19 18 17 16 14 13 12 11 10 15
STATION M EM ORY
NO. & NAME DESCRIPTION NO. & NAME DESCRIPTION
1. POWER Push this button to turn the unit into standby
mode, push it again to turn off the unit. 12. WOOFER
ON/OFF
Push this button to turn on or off the subwoofer
output.
2. STANDBY
INDICATOR When this unit is in standby mode, the
indicator lights. 13. DIMMER Push this key to set the brightness of the front
panel display
3. STANDBY When this unit is in standby mode, push this
button to turn on this unit, push it again to
turn this unit back to standby mode. 14. DIGITAL IN Push this button when using a source connected
by a DIGITAL IN. Pushing this button to select:
DVD COA. /ANA. VIDEO 1 COA. /ANA.
VIDEO 2 OPT. /ANA. VIDEO 3 OPT. /ANA.
4. VFD
DISPLAY UNIT 15. SURROUND
MODE
Selects surround modes: Theater, Hall, Passthru,
Movie, Music, and Room.
5. MASTER
VOLUME
Rotate this knob clockwise or
counterclockwise, the master volume will be
increased or decreased. 16. STEREO With the unit in the STEREO mode, only front
left and front right speakers and Woofer are
working.
6. STATION To select a preset channel during the tuner
mode. 17. PROLOGIC II When receiving Analog/digital PCM signal or
2CH Pro Logic, turn on this button then the
playing is under analog 5.1CH state.
7. MEMORY To preset the broadcast stations. 18. DTS/DOLBY
DIGITAL
When playing 5.1CH source, and while you are
enjoying Stereo, push this button to playback
source in DTS/DOLBY DIGITAL.
8/9. TUNING +/- Tuner frequency up & down. 19. AV3 IN Input for VCR, Video Camera Recorder, etc. It
contains one Optical port, one S-video port one
video input and Analog Left and Right inputs.
10. PHONES Jack for the stereo headphones. 20. RESET When this unit is ON, use a paper clip to press
this button for more than 3 seconds to reset the
whole system (including memories).
11. MUTE Push this button to mute the sound, push it
again to cancel the mute function. 21. INPUT
SELECTOR
Push this button to select inputs Tuner (FM,
AM), VIDEO 1, VIDEO 2, VIDEO 3, DVD,
AUX, TAPE and PHONO.