Planet Technology BT-200U - Manual (Page 12)

Broadband Router User Guide
8
2.4 Initial Bluetooth Configuration
1. Once the software is well installed, your computer should prompt a Bluetooth icon
on the bottom right corner. You may right click and select the Start Using Blue-
tooth to make initial Bluetooth configuration.
2. The following message is shown to prompt you to select the location where you
want to show the Bluetooth icon. Select the location and click Next.
3. On the Device Name and Type screen, enter the required information:
Device Name
—other Bluetooth-enabled devices, when inquiring about devices
within radio range, will see this user-configured device name.
The name can be changed after the installation process through the Bluetooth
Software Configuration Panel.
Device Type
—click the down arrow 6and choose Desktop or Laptop from the
drop-down list. The device type can be changed after the installation process
through the Bluetooth Software Configuration Panel.
Click the Next button.