Philips 19PFL3403D/10 - Manual (Page 9)

EN-8
Firmly pull the stand from the bottom of 3.
the TV. Place both the stand and bolts in a
secure location for future reinstallation.
Step 3 Connect cables
Connect the antenna cable, mains cord and
all other devices to the back of the TV as
described in the following sections.
Step 4 Secure the VESA-compatible wall
bracket to the TV
WARNING B
Only use the bolts (M4 for all models)
and spacers (4cm) to secure the
VESA-compatible wall bracket to your
TV�
The bolts (not supplied) are designed
to match the weight of your TV;
spacers (not supplied) are designed
for easy cable management�
Note D
Depending on your VESA-compatible wall
bracket, you may need to separate the
mounting plate from the wall bracket for
easier installation. Refer to your VESA-
compatible wall bracket documentation for
instructions.
Locate the four mounting nuts at the back
1.
of the TV.
Align the plate/bracket to the four 2.
mounting nuts, placing the spacers between
the plate/bracket and the mounting nuts.
Using a spanner, insert the bolts through
3.
the plate/bracket and spacers, tightly
securing the bolts to the mounting nuts.
x4
Continue with the instructions provided 4.
with your VESA-compatible wall bracket.