Philips 19PFL3403D/10 - Manual (Page 23)

EN-22
Automatically switch the TV to standby
(Sleeptimer)
Sleeptimer switches the TV to standby after a
defined period of time.
Press 1. MENU on the remote control and
select Features > Timer > Sleeptimer.
Press
2.
Æ
to enter the Sleeptimer menu
Press 3.
Î
or ï to set the sleep time up to
180 minutes in steps of five minutes. If set
to zero minutes, the Sleeptimer is switched
off.
Press
4. OK to activate the Sleeptimer.
Note D
You can always switch off your TV earlier or
reset Sleeptimer during the countdown.
Automatically switch the TV on
(Start time)
Start time switches the TV to a specified
channel at a specified time, from standby.
Press 1. MENU on the remote control and
select Features > Timer > Start time.
Press
2.
Æ
to enter the start time menu.
Use 3.
Î
or п, Ж or Í to select and enter
the menu items to set a channel, day of the
week, frequency and starting time.
Press
4. OK to confirm your choice.
Press 5. MENU to exit.
Tip E
To switch off Start time, select Off in the
Start time menu.
Automatically switch the TV off
(Stop time)
Stop time switches the TV to standby at a
specified time.
Press 1. MENU on the remote control and
select Features > Timer > Stop time.
Press
2.
Æ
to enter the Stop time menu.
Use 3.
Î
or п , Ж or Í to select and enter
the menu items to set the day of week.
Press
4. OK to confirm.
Press 5. MENU to exit.
Note D
You can always switch off your TV earlier or
reset Sleeptimer during the countdown.
Lock TV channels or connected devices
(Auto Lock)
Lock TV channels or connected devices with
a four digit code to prevent children from
watching unauthorised content.
To set or change the Auto Lock code
Press 1. MENU on the remote control and
select Features > Auto lock > Change
code.
Press
2.
Æ
to enter the code setup.
Enter your code with the number keys. 3.
The Features menu reappears with a
message confirming that your code is
created or changed.
Tip
E
If you forget your code, enter ‘0711’ to
override any existing codes.
To enter the Auto Lock menu
Press 1. MENU on the remote control and
select Features > Auto Lock and press
Æ
to enter your code.
Enter your code with the number keys. 2.
To unlock all channels and connected
devices
In the 1. Auto Lock menu, select Clear all�
Press 2. OK.