5frequently asked questions – Philips SLV3105 User Manual
Page 13
5
Frequently asked
questions
www.philips.com/support
In this chapter, you will find the most
frequently asked questions and answers
about your product.
No image or wrong image on TV1
Make sure the video source is
switched on.
Make sure the video source is
connected to the transmitter (A).
Make sure the transmitter (A) is
connected to TVI.
Make sure the transmitter (A) is
switched on.
Make sure SCART cables are firmly
inserted.
Make sure the correct SCART input
on TV1 is selected.
No image or wrong image on TV2
Make sure SCART cables are firmly
inserted.
Make sure the receiver (B) is
connected to TV2.
Make sure both receiver (B) and
transmitter (A) are switched on.
Make sure the video source is
switched on.
Make sure the correct SCART input
on TV2 is selected.
If the video source gives proper
image on TV1, make sure the video
source gives video signal in CVBS
mode.
Change the wireless channel that is
used for communication.
See "Remove interference on TV2"
on page 10.
The receiver (B) is out of range of
the transmitter (A). The number of
walls and ceilings between the
receiver (B) and transmitter (A)
restricts the distance.
Interference in the image on TV2
Slightly change the position of the
receiver (B) or the transmitter (A).
Change the wireless channel that is
used for communication.
See "Remove interference on TV2"
on page 10.
The receiver (B) is out of range of
the transmitter (A). The number of
walls and ceilings between the
receiver (B) and transmitter (A)
restricts the distance.
The video sources do not respond to the
remote control commands from TV2
Point the remote control directly to
the receiver (B).
Replace the batteries of the remote
controls with new ones.
Install the remote control blaster
cord (D).
See "Install the remote control blaster
cord" on page 10.
Note: The maximum operating distance of
the remote control is 7m.
Buzzing sound when you use the remote
control.
Slightly change the position of the
receiver or the transmitter until the
buzzing sound stops.
13
Frequently asked questions
English
13
EN