PreSonus FireBox - Manual (Page 6)

2 INSTALLATION AND SETUP
6
2 . 2 I N S T A L L A T I O N O F F I R E B O X
D R I V E R S
Windows XP
Installation Steps:
- Quit all currently running applications
- Insert CD-ROM Driver Installation included with your FIREBOX into your
computer. (DO NOT CONNECT YOUR FIREBOX AT THIS TIME.)
- CD should auto run. (If not, navigate to CD and double click on
FIREBOX_Installer.exe)
Carefully read and follow the FIREBOX installation instructions. The installer will
prompt you to connect your FIREBOX at the proper time. (NOTE: If you are you
connecting the FIREBOX via a standard 6-pin Firewire cable, power for the unit
will be supplied via the Firewire cable. If you are using a 4 to 6-pin Firewire cable,
you will need to connect the included external power supply to power the
FIREBOX.) This installation procedure will also install the FIREBOX Control
Panel and Mixer software.
Note: If at any point during installation a “Software Installation” message appears
from Windows regarding Windows Logo testing click “Continue Anyway” to
continue installation.