Paxar 9840CL - Manual (Page 49)

Paxar Systems Group Paxar 9840CL Printer Troubleshooting - 5
••
45
263 Primary monetary symbol is invalid.
264 Secondary symbol selection must be 0 (none) or 1 (primary secondary sign).
265 Monetary decimal places must be 0 to 3.
266 Character string length in Packet E must be 5 (MPCL control characters) or 7
(ENQ/IMD command character).
267 Baud rate selection must be 0 (1200), 1 (2400), 2 (4800), 3 (9600), 4 (19.2), or 5
(38.4).
268 Word length selection must be 0 (7 bits) or 1 (8 bits).
269 Stop bits selection must be 0 (1 bit) or 1 (2 bits).
270 Parity selection must be 0 (none), 1 (odd), or 2 (even).
271 Flow control selection must be 0 (none), 1 (DTR/DSR), 2 (CTS/RTS), or 3
(XON/XOFF).
272 Internal code page selection must be 0 (internal), 1 (ANSI), 2 (DOS 437), or 3 (DOS
850).
273 Cut adjustment must be –300 to 300 dots.
282 RS232 Trailer string is too long. Use a maximum of 3 characters.
283 ENQ Trailer string is too long. Use a maximum of 3 characters.
284 The buffer type must be T (transmit), R (receive), I (image), F (format, batch date
and graphics), D (downloadable fonts), or V (vector/scalable fonts).
285 The storage device type must be N (non-volatile RAM) or R (volatile RAM).
286 The buffer size is invalid.
287 The printhead width must be 0.
290 Action must be 0 (disable) or 1 (enable) for Backfeed Control.
291 Dispense position must be 50 to 200 dots and/or the backfeed distance is greater than
the dispense position.
292 Backfeed distance must be 10 to 200 dots.
310 Check digit scheme number must be 1 to 10.
311 Modulus must be 2 to 11.
314 Check digit algorithm must be D (sum of digits) or P (sum of products).
325 Duplicating direction must be 0 or 1.
327 Amount of row adjustment must be 0 to 999.
328 Duplicate count must be 0 to 999.
340 Bitmap line encoding must be H (hex) or R (run length).
350 Font selector must be 1 to 9999.
351 Font data length must be 68 to 16384.