Paxar 9840CL - Manual (Page 46)

42
••
Troubleshooting - 5 Paxar Systems Group Paxar 9840CL Printer
Error Messages
You may receive the following types of error messages:
♦
Data Errors
♦
Communication Errors
Some errors numbered 400 – 438 and 500 – 574 are internal software errors. Errors
numbered 900 – 999 are hard printer failures. If you cannot clear an error, turn off the
printer, wait several seconds and then turn on the printer. Call Technical Support if you
receive any error message not listed in this chapter.
Data Errors
Errors 001 to 405 and 429 to 435 are data errors. This type of error indicates that incorrect data
was sent to the printer, and the printer is ignoring it. Your System Administrator should correct
the packet and send it back to the printer.
Error Description / Action
001 Packet ID number must be 1 to 999.
002 Name must be 1 to 8 characters inside quotes or a printer-assigned name (“ ”).
003 Action must be A (add) or C (clear).
004 Supply length is invalid.
005 Supply width is invalid.
006 Storage devise must be R (volatile RAM).
007 Unit of measure must be E (English), M (Metric), or G (Dots).
010 Field ID number is outside the range 0 to 999.
011 Field length exceeds 2710.
012 Row field position is greater than the maximum stock dimension.
013 Column field position is greater than the maximum stock dimension.
014 Font selector is invalid.
015 Character rotation must be 0 (0 degree), 1 (90 degree), 2 (180 degree), or 3 (270
degree).
016 Field rotation must be 0 (0 degree), 1 (90 degree), 2 (180 degree), or 3 (270 degree).
017 Field restriction must be V (variable) or F (fixed).