Planet Technology FGSW-2620VSF - Manual (Page 14)

- 14 -
Figure 4-5 Port Configuration Web Page screen
Object Description
Port Indicate port 1 to port 26.
Enable Per port Disable or Enable on Web Smart Switch.
Auto Per port Disable (Off) or enable (On) Auto negotiation on Web Smart Switch.
Spd/Dpx Adjust per port speed duplex mode on Web Smart Switch; the available options are Auto, 100F,
100H, 10F, 10H. Default mode is Auto
.
Flow Control Per port Flow control Disable (Off) or enable (On) on Web Smart Switch. Default mode is On.
InRate Input the value of packet rate sent from the connected port to this port must enable the flow control
feature of this port for the function to work normally. The available value ranges from 1 to 99 and rate
unit: 1Mbps
.
OutRate Input the value of packet rate sent from this port to the connected port. The available value ranges
from 1 to 99 and rate unit: 1Mbps.
Apply button Press this button for save current configuration of each port on Web Smart Switch.
Table 4-2 Descriptions of the Port Configuration screen Objects