PhatNoise KDC-W707 User Manual
Page 29
English
|
29
2
Start the Letter Seek
Push the Control knob towards [
4] or
[
¢].
The initial of Genre name, Artist name, or Album
name is displayed and announced in order.
• The announcement of the initial can be canceled by
• When you push the Control knob to the reverse [
4]
or [
¢] during Letter Seek, the initial is displayed
and announced in the reversed order.
• Once Letter Seek starts, it cannot be cancelled.
3
Select the song to play
Press the Control knob when the initial of
the song you are searching is displayed and
announced.
The selected initial group plays.
Disc Naming (DNPS)
Attaching a title to a CD.
1
Play the disc you want to attach a name to
• A title cannot be attached to MD or Audio file media.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
3
Select Name set mode
Push the Control knob towards [FM] or [AM].
Select the "Name Set" display.
4
Enter Name set mode
Press the Control knob for at least 1 second.
5
Move the cursor to the enter character
position
Push the Control knob towards [
4] or
[
¢].
6
Select the character type
Press the Control knob.
Each time you press the knob, the character type
alternates between the types shown in the table
below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
7
Select the characters
Push the Control knob towards [FM] or [AM].
8
Repeat steps 5 through 7 and enter the name.
9
Exit Menu mode
Press the [MENU] button.
• When operation stops for 10 seconds the name at
that time is registered, and Name Set mode closes.
• Media that you can attach a name to
- Internal CD player: 10 discs.
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
• You can change the name of a CD by the same
operation you used to name it.