PhatNoise KDC-W707 - Manual (Page 10)

10 | English
General features
Selecting the Source
Press the [SRC] button.
Source required
Display
Tuner "TUNER"
CD "Compact Disc"
External disc (Optional accessory) "CD Changer"
Auxiliary input (KDC-W808 only) "AUX"
Auxiliary input (Optional accessory) "AUX EXT"
Standby (Illumination only mode) "STANDBY"
• This unit automatically turns full power OFF after 20
minutes lapses in Standby mode in order to save the
vehicle's battery.
The time until full power OFF can be set in OFF Timer> (page 37).
Volume
Increasing Volume
Turn the [VOL] knob clockwise.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time you press the button is pressed, the
Attenuator turns ON and OFF.
When the Attenuator is ON, "ATT ON" is
displayed.
System Q
Selecting the best sound setting preset for
different types of music.
1 Select the source to set
Press the [SRC] button.
2 Select the Sound type
Press the [Q] button.
Each time you press the button is pressed, the
sound setting alternates.
Sound setting Display
User memory "User"
Rock "Rock"
Pops "Pops"
Easy "Easy"
Top 40 "Top 40"
Jazz "Jazz"
Natural "Natural"
• User memory: The values set on the
(page 11).
• Change each setting value with the
Setting> (page 10).
First, select the speaker type with the Speaker setting.
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2 Enter Speaker Setting mode
Press the [VOL] knob.
3 Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting
alternates between the settings shown in the
table below.
Speaker type Display
OFF "Speaker OFF"
For 5 & 4 in. speaker "Speaker 5/4inch"
For 6 & 6x9 in. speaker "Speaker 6x9/6inch"
For the OEM speaker "Speaker O.E.M."
4 Exit Speaker Setting mode
Press the [VOL] knob.