Philips TP3675 - Manual (Page 10)

10
AUTO PRESET during First Power On
L When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before you press the
power button.
(1) Insert the batteries into the remote control. (See page 7)
(2) Connect the antenna cable to the TV set. (See pages 7 - 8)
(3) Plug in the AC POWER cord to the wall outlet.
1
Press the POWER button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE mode will be
displayed.
2
Press CH UP ( 8 ) or DOWN ( 9 ) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
3
Press VOL (+) or (–) to access the AUTO PRESET mode.
4
Press VOL (+).
The tuner will automatically search for the broadcasting
and cable TV channels. (The CH No. will automatically
increase when it appears.)
If you want to stop the AUTO PRESET process once it
has started, press
VOL (–) and it will be canceled.
If you want to PRESET again, please refer to page 26
on AUTO PRESET.
To cancel AUTO PRESET
Press
VOL (–).
5
Once AUTO PRESET is completed, the lowest channel number
memorized will be displayed.
• If AUTO PRESET does not memorize all the channels in your region, please refer to pages
28 - 29 for more information on manually memorizing the channels using CHANNEL MEMORY.
• It may be difficult to PRESET all channels in an area when the broadcasting signals are weak
or multiple stations are received on the same channel. Please refer to pages 28 - 29 for more
information on manually memorizing additional channels using CHANNEL MEMORY.
NOTE:
POWER
CHANNEL
UP (
8 )/
DOWN ( 9 )
MENU
VOLUME
(+)/(–)
A/CH
INPUT
STATUS
(AUTO PRESET mode)
(Remote Control)
(On the Set)
(SELECT LANGUAGE mode)
10-18 TP3675C 6/9/00, 9:34 AM 10