Polaris Trail Boss 9921784 - Manual (Page 85)

82
MAINTENANCE
Lights
Taillight/Brakelight Lamp Replacement
1. Remove the taillight lens cover
mounting screws. Remove the
lens cover and gasket and set
aside for reassembly.
2. Remove the lamp.
3. Apply dielectric grease to the
socket and install the new lamp.
4. Test the taillight/brake light for
proper operation.
5. Reinstall the gasket and lens cover.
Indicator Lamp Replacement
1. Remove the instrument panel or front cover, if necessary, to access
the back of the indicator panel.
2. Using a small, straight-blade screwdriver, turn the base of the bulb
1/4 turn counterclockwise.
3. Using a needle-nose pliers or similar tool, pull the lamp out of the
indicator panel housing.
4. Insert the new bulb and seat it by turning it 1/4 turn clockwise.
5. Reinstall the instrument panel or front cover.
Lamp