Pitco Frialator Compact Pasta Control - Manual (Page 5)

Pitco Compact Pasta Control
60143701
L20-269 Rev 0
Pg. 5 of 5
4 Other Displays:-
4.1 Low Vat Temperature:
When tank temperature is below 150°F (65°C), the display will show as
blanks. This is normal for cold start-ups. Heat Demand indicator is
located between the first and second digits of display.
4.2 Drain Valve Open:
When drain valve is detected open, normal
operations are suspended. The display will show
Drain-Turn-Off message until reset. To reset,
CLOSE the drain valve, turn the control OFF, then
ON. Note: some applications do not use the drain
valve input.
4.3 Equipment Fault Displays
This control will detect faulty probe conditions. If temperature probe faults are detected, display
will show one of two possible conditions. All other functions are disabled. To reset, turn control
OFF, then ON.