Using the high pass filter 175, Adjusting source levels 175, Enhancing bass (bass booster) 175 – Pioneer AVIC-Z120BT User Manual
Page 175: Setting the simulated sound, Stage, Customizing preferences, Using the high pass filter, Adjusting source levels, Enhancing bass (bass booster), Setting the simulated sound stage
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, activate
HPF
(high pass filter). Only frequencies higher than
those in the selected range are output from
the front or rear speakers.
1
Display the
“AV Sound Settings”
screen.
= For details, refer to Displaying the “AV
2
Touch [HPF].
Each time you touch [
HPF] selects cut-off fre-
quencies in the following order:
Off
— 50Hz — 63Hz — 80Hz — 100Hz —
125Hz
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
1
Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2
Display the
“AV Sound Settings”
screen.
= For details, refer to Displaying the “AV
3
Touch [SLA].
4
Touch [+] or [
–] to adjust the source vo-
lume.
“+8dB” to “–8dB” is displayed as the source
volume is increased or decreased.
The following AV sources are set to the same
source level adjustment volume automatically.
! CD, ROM, DivX
! SD and USB
! AV1 and AV2
! EXT1 and EXT2
p The different source volume level can be set
between
iPod and USB.
Enhancing bass (Bass Booster)
You can enhance bass sounds that are often
muted by driving noise.
1
Display the
“AV Sound Settings”
screen.
= For details, refer to Displaying the “AV
2
Touch [Bass Booster].
3
Touch [+] or [
–] to adjust the range from
0 to 6.
Setting the simulated sound stage
You can select the desired effect from various
simulated sound stages, such as Music Studio
or Dynamic Theater. You can also adjust a lis-
tener positioning effect.
Setting a stage that fits your image
1
Display the
“AV Sound Settings”
screen.
= For details, refer to Displaying the “AV
2
Touch [Staging].
3
Touch desired stage setting.
p “Living Room” setting that emphasizes
mid-range sound hardly has any effect near
the maximum volume level.
p When you set staging to an option other
than
“Off”, the high pass filter (HPF) setting
turns
“Off”.
En
175
Chapter
31
Customizing
pr
eferences
Customizing preferences