Switching off the modulator – Philips VR9185 User Manual

Page 33

Reducing picture disturbance
(’optimizing the modulator’)

You may experience picture disturbance if you have not used
a scart cable to connect your video recorder and TV. This is
because another TV station in your reception area may
already be using UHF-channel CH35 or 583MHz.

Make sure that there is no cassette in the video recorder.
On the video recorder, simultaneously hold the

STOP/EJECT ?

and the

PLAY G

button for a few

seconds until e.g.: ’CH35’ or ’583’ appears in the
display. The video recorder will transmit a test picture on
UHF-channel 35(or frequency 583Mhz).

INSTALLATION

OPTIMIZE MODULATOR

OPTIMIZE

CH35

MODULATOR

CHANNEL/FREQ.

________________________________

TO STORE
PRESS

In line ’CHANNEL/FREQ.’ select the indication for
channel ’CH’ or frequency ’FREQ.’, using the

button.

Select the line ’OPTIMIZE’ with the

P =

button. Press the

button.

When the video recorder finds a ’free’ TV channel, the
channel or frequency will be indicated.

D You can also enter the channel or frequency directly

with the digit buttons

0-9

Tune in the TV set in this channel or frequency.

Confirm the channel or frequency indicated with the

button.

To end, press the

button.

Switching off the modulator

If you cannot clear picture or sound interference, you can
switch off the built-in modulator. You should only do this if you
have connected the video recorder to the TV set with a scart
cable.

D With the function ’Easy Link/NexTView’ the

modulator will be switched off automatically.

Switch on the TV set and select the programme number
for the video recorder.

Make sure that no cassette is in the video recorder. On
the video recorder, press the

STOP/EJECT ?

and

PLAY G

button at the same time for several seconds,

until, for example, ’CH35’ or ’583’ appears on the video
recorder display.

Select the line ’MODULATOR’ on the TV screen or ’M ON’
in the display with the

P =

button.

With the

button, select the function ’OFF’ on

the TV screen or ’MOFF’ (modulator off) in the display.
Select ’ON’ on the TV screen or ’M ON’ (modulator on) in
the display to switch the modulator back on.

Confirm with the

button.

To end, press the

button.