Maintenance – Polaris Outlaw 450 MXR User Manual
Page 105
101
Maintenance
Engine Oil Change
1. Position the vehicle on a level surface.
2. Start the engine. Allow it to idle for two to three minutes. Stop the engine.
3. Place a drain pan beneath the crankcase. Remove the drain plug. Allow the oil to drain
completely.
CAUTION! Hot oil can cause burns to skin. Do not allow hot oil to contact skin.
4. Clean the crankcase sealing surface and the
drain plug (with magnet) thoroughly.
5. Replace the sealing ring. Reinstall the drain
plug. Torque to 15 ft. lbs. (20 Nm).
Drain
Plug
This manual is related to the following products:
See also other documents in the category Polaris Cars:
- Sportsman 6x6 (136 pages)
- Sportsman 6x6 (133 pages)
- Sportsman 500 EFI X2 (157 pages)
- Predator 50 (192 pages)
- Predator 50 (199 pages)
- Predator 50 (199 pages)
- Predator 50 (188 pages)
- Predator 50 (207 pages)
- Predator 50 (220 pages)
- Predator 50 (199 pages)
- Predator 50 (189 pages)
- Predator 50 (184 pages)
- Predator 50 (148 pages)
- Predator 50 (191 pages)
- Predator 50 (186 pages)
- 800 RMK 144/155 (159 pages)
- 800 RMK Shift (133 pages)
- 800 RMK 144/155 (160 pages)
- 800 RMK Shift (135 pages)
- 800 RMK 144/155 (134 pages)
- 800 RMK 144/155 (176 pages)
- 800 RMK 144/155 (135 pages)
- 800 RMK 144/155 (141 pages)
- 600 IQ LX (154 pages)
- Sportsman 600 (220 pages)
- Sportsman 600 (202 pages)
- Predator (187 pages)
- Predator 9920779 (191 pages)
- Sportsman 600 (200 pages)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (1 page)
- 800 XC SP EDGE M-10 (2 pages)
- 800 XC SP EDGE M-10 (1 page)
- Sportsman 500 EFI Touring (149 pages)
- Sportsman 700 EFI X2 (163 pages)
- Series 10 Ranger 425 2x4 (104 pages)
- Series 10 Ranger 425 2x4 (121 pages)
- Sportsman 9922245 (133 pages)
- Sporstman X2 800 EFI (161 pages)
- SuperSport (1 page)
- SuperSport (1 page)
- SuperSport (1 page)