Panasonic CQ-VA707N - Manual (Page 47)

48
CQ-VA707N
E
N
G
L
I
S
H
45
Auxiliary
¡Watching the Image or listening to the sound of a connected external device
¡Connect a mobile video deck, video camera, rear-view camera, or car navigation
system, for example.
WARNING:
For safe driving, the operation is possible only when stopped with the parking brake engaged. “WARN-
ING” will be displayed, if you try to switch to VTR1 or VTR2 mode by pressing the [MODE] button while
driving.
1 2 3
4 5 6
TA AF PTY
A LOC
MODE NAVI MENU
PWR
ENTER
MUTE
VOLUME
TRACK
DISC/BAND
NAVIGATION
CH z CH x
RANDOM SCAN REPEAT
TITLE
ASPECT OPEN/CLOSE
Car AV
MODE
[MODE]
VTR Mode
Press [MODE] to change to VTR1 mode or VTR2 mode as follows.
The image supplied by a connected external device is displayed. At
the same time, the VTR1 or VTR2 indicator on the front panel of the
display unit lights.
Example of VTR1 mode
ALARM indicator
R L VIDEO
Notes:
¡In VTR1 mode, the video and audio from the external device connected to VTR1-IN are selected.
¡In VTR2 mode, the video and audio from the external device connected to VTR2-IN are selected.
¡If the navigation mode is ON, only the audio signal is switched while the video signal remains as it is. (
a
page 33)
¡The mode can be changed even when the display unit is in the retracted position.
Control Unit
(Front)
Notes:
¡If your car navigation system is not connected, be sure to set the NAVI (navigation input) to RGB on
the setting/ adjusting menu. ( a page 22)
¡If your rear-view camera is not connected, be sure to set the CAMERA to OFF on the setting/adjust-
ing menu. ( a page 22)
VTR2-IN
VTR1-IN
R L VIDEO
Emergency
Announcement
When an emergency announcement
is received in VTR mode, “ALARM!”
lights and that announcement can be
heard.
TR1 VTR2 CH·C TV
VOLUME PWR PWR
OPEN/ OPEN/CLOSE MODE MODE TILT TILT
MUTE
CQ-VA707N
PWR
OPEN/
7.0'' WIDE COLOR LCD MONITOR WITH R 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER 7.0'' WIDE COLOR LCD MONITOR WITH R
MODE TILT
EO
MODE
[MODE]
FM/AM(LW/MW)
VTR2 CH • C
VTR1
(Changer Control)