Panasonic CQ-VA707N - Manual (Page 43)

44
CQ-VA707N
E
N
G
L
I
S
H
41
1 2 3
4 5 6
TA AF PTY
A LOC
MODE NAVI MENU
PWR
ENTER
MUTE
VOLUME
TRACK
DISC/BAND
NAVIGATION
CH z CH x
RANDOM SCAN REPEAT
TITLE
ASPECT OPEN/CLOSE
Car AV
3
MODE
[MODE]
CD Changer Basics
¡An optional changer (CX-DP88N, for example) must be connected.
¡Use of the optional Dual CD Changer Control Unit (CA-CD55EN) allows you to con-
nect two CD changers (dual changers). ( a page 60)
¡When the unit is connected with a CD text recognizable CD changer (CX-DP9061EN,
for example), CD text can appear on the display.
Starting the CD Changer
Once the CD changer has been connected, press [MODE] to change
to the CD changer mode as follows.
Notes:
¡The CH
• C mode is not available
if no changer is connected.
¡If no disc is in the magazine, “NO
DISC” appears.
¡If the magazine is inserted while
power is on, the CH • C mode is
automatically selected to start
playing.
¡If the navigation mode is ON, only
the audio signal is switched while the video signal remains as it is.
¡The mode can be changed even when the display unit is in the
retracted position.
FM/AM(LW/MW)
VTR2 CH • C
VTR1
(Changer Control)
[3](TITLE) Title Display
Track title or disc title appears on the display only when the unit is
connected to a CD changer that can recognize CD text (CX-
DP9061EN, for example).
Disc Number Track Number
TR1 VTR2 CH·C TV
VOLUME PWR PWR
OPEN/ OPEN/CLOSE MODE MODE TILT TILT
MUTE
CQ-VA707N
PWR
OPEN/
7.0'' WIDE COLOR LCD MONITOR WITH R 7.0'' WIDE COLOR LCD MONITOR WITH RECEIVER 7.0'' WIDE COLOR LCD MONITOR WITH R
MODE TILT
EO
MODE
[MODE]
Press [3](TITLE) to switch the display between disc title and track title.
(Only for remote control)
Notes:
¡“NO TITLE” appears on the display if a disc, which does not support
the text display, has been loaded.
¡Up to 12 characters can be displayed at a time.
¡If the text has more than 12 characters, it is shown with up to 48
characters just once by scrolling, then the first 12 characters are
kept displayed.