Philips DVD795SA - Manual (Page 11)

1 Connect an S-Video cable (not supplied) to the Player’s S-
VIDEO (VIDEO OUT) jack and to the TV’s S-VIDEO IN
jack.
2 Connect the supplied red and white audio cables to the
Player’s red and white (right and left) AUDIO OUT jacks
and to the right/left AUDIO IN jacks on the TV. Match the
cable colors to the jack colors.
3 Set the Progressive/Interlace switch on the rear of the
Player to Interlace.
4 Connect the power cords of the Player and the TV to a
power outlet.
5 Press STANDBY-ON y y on the Player to turn on the
Player. The red Standby light will disappear.
6 Turn on the TV power and set the TV to the correct S-
Video In channel.
This channel might be near channel 00. See
your TV owner’s manual for details. Or, change channels at the
TV until you see the Player’s blue screen saver on the TV screen.
Hookups (cont’d) 11
Connecting to a TV Only
TV has an S-Video In Jack
Back of TV
(example only)
LEFT AUDIO IN
S-VIDEO IN
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
RIGHT AUDIO IN
2
3
4
1
• On the TV, the S-Video In jack
may be labeled Y/C, S-Video, or
S-VHS (Super Video).
Helpful Hint