Philips WAC5 - Manual (Page 29)

29
English
HD
Re-establishing Wi-Fi connection
After upgrading or restoring the Center’s
firmware, you need to re-establish the Wi-Fi
connection between Center and Stations.
On Center,
● Select HD mode and then, enter Installation
Mode by:
a. Press and hold
STOP • MENU (or on
remote control, press MENU)
b. Use the navigation controls 3 or 4 and 2 to
enter
Station Mgnt menu
c. In Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select Add New
Station
➜ Searching for Stations starts
On the Stations,
●
Enter Installation Mode by:
a. Remove the Station’s power plug and then,
connect it to the power supply again
➜
“ Connecting to Center” appears
b. On the remote control, press MENU to
enter the selection screen of Installation
Mode and Select Server
c. Use the navigation controls 3 or 4 and 2 to
select Installation Mode
On Center,
● Press STOP Çto exit Installation
Mode when Center has found all the stations
3
Press 3 or 4 and 2 to select Firmware
4
Press 3 or 4 and 2 to select Restore
firmware
5
Press 3 or 4 and 2 to select Yes.
p001-p037_WAC5_Eng_22 9/14/2005, 15:09 29