Philips WAC5 - Manual (Page 11)

11
English
Controls
Center’s 2-way remote control
IMPORTANT!
– This remote control can be also used for
some other Philips’ wireless music systems,
which provide sound and tuner features
unavailable in WAC5. Such sound/tuner
buttons will not work with WAC5.
– To operate Station using Center’s remote
control, see Preparation: Using Center’s
remote control.
1 y
– press briefly to switch the set to standby mode
– press and hold to switch the set to Eco Power
mode or on
2 Synchro display
– synchronous display of the set’s status
3 Source buttons
CD/MP3-CD
– selects CD source
– In standby mode: switches the set on and selects
CD source.
HARDDISK
– selects HD source
– In standby mode: switches the set on and selects
HD source
TUNER/AUX
– selects the audio input from an additional
connected appliance
– In standby mode: switches the set on and selects
the audio input from an additional connected
appliance
4
1 / 2 / 3 / 4
– navigation controls (left, right, up, down) to scroll
through the option list
1
– HD/CD: returns to previous option lists
3 / 4
– HD/CD: skips/searches tracks/passage backward/
forward (in playback screen); fast scrolls the
option list
2 / OK
– confirms selection
5 4 / ¢
– HD/CD: skips/searches tracks/passage
backward/forward (in playback screen)
6 ÉÅ
– HD/CD: starts or pauses playback
7 SHUFFLE
– selects random playback
8 REPEAT
– selects continuous playback
9 MARK/UNMARK
– CD: selects or deselects tracks to be recorded
on hard disk
1
2
3
4
@
#
!
6
5
7
9
8
$
^
&
5
(
%
*
)
SAME ARTIST SMART EQ
¡
0
p001-p037_WAC5_Eng_22 9/14/2005, 15:08 11