Philips CAM300 - Manual (Page 10)

8 EN
Select a special effect
1
In viewfinder mode, tap to show the
system setting menu.
2
Tap [Effects] to enter special effect setting.
3
Tap / to select a special effect you
like.
4
Tap [OK] to confirm the setting.
Charge the built-in battery
Note
• The USB connector of the camcorder is primarily
intended for charging and mass storage purposes.
• You can also connect the USB connector of the
camcorder to another device (for example, a TV, DVD/
Blu-ray player or Home cinema set) for media play. In
this case, make sure that the device supports the H.264
file format.
•
Not all devices that support H.264 file format can
play media files in the camcorder through direct USB
connection.
1
Press at the bottom of the camcorder
to eject the USB connector.
PRESS
2
Connect the USB connector to a USB
socket on a PC.
» The status indicator on the shutter
button starts flashing in orange.
3
Wait until the status indicator stops
flashing and turns to green steadily.
» The built-in battery is fully charged.
Tip
• The camcorder is fully charged for first-time use.
• It takes about 3.5 hours to fully charge the built-in
battery via the PC.
You can also charge the camcorder via a USB
adaptor (not supplied) connected to mains
power. The charge time is about 2 hours.
UK
EUR
UK
EUR