Panasonic TX-76PW300A - Manual (Page 18)

18
Set Up menu
allows you to “lock out” a channel to prevent a child from watching or hearing a
particular programme. Select the channel or AV to be locked before pressing the SET
UP button.
When no picture is received or when the signal is very weak, the screen reverts to a
blue background and the sound is muted. This feature can be turned Off to continue
watching weak signals. It may be necessary to turn the Blue back off when watching
a videotape when CUE or REVIEW has been selected.
If the 3D-COMB function is On, dot interference or cross colour will be reduced.
Note: This function is not available for component input.
This activates motion compensation to smooth the image and get rid of unwanted
picture movement.
Note: This function is only available in 100Hz mode.
This provides access to many other features including system select and tuning
options.
If you notice a slight tilt in the picture or if there are coloured patches at the corners of
the screen, use this feature to eliminate them.
Refer to page 19 for instructions on using the geomagnetic correction adjustment.
This television lets you to prove ownership by letting you enter personal
identification into it. The “Owner I.D” function allows you to enter a security code and
address information so that in the unfortunate event of theft it will help the Police to
determine the owner.
Refer to page 20 for instructions on how to set the Owner I.D.
Reproduction of irregular signals such as certain video (AV Mode only) games or
some rental video tapes may be improved by turning the VCR/GAME feature On.
This option is only available in AV mode. It allows you to select the correct colour
system for the signal being received. If a clear picture with correct colours cannot be
obtained, a change to the Colour System may
improve the picture. The settings
are AUTO, PAL, NTSC4.43 and NTSC3.58. The Australian and New Zealand colour
system is PAL.
Note: PAL and NTSC3.58 are different colour signal broadcast transmission systems
applicable to differing countries. NTSC4.43 is a system used in special VCRs to
playback NTSC recorded tapes on a PAL television.
Child lock
Blue back
3D-COMB
Flicker reduction
(100Hz Mode only)
Tuning menu
(RF Mode only)
Geomagnetic
Owner ID
VCR/GAME
(AV Mode only)
Colour system
(AV Mode only)