Starting the engine – Polaris Sprotsman 90 User Manual
Page 99
![background image](/manuals/176206/99/background.png)
97
Starting the Engine
NOTE: The choke is fully on when the lever is pushed completely to the left. The choke
is off when the lever is pushed completely to the right. The choke can be adjusted
gradually, depending on how much choke is needed for starting.
3. If the engine is cold, use full choke by pushing the choke lever all the way to the left.
A warm engine will not require the use of the choke.
4. Turn the engine stop switch to RUN, then turn the ignition key to ON. NOTE: Do not
press the throttle while starting the engine.
5. Squeeze the rear brake lever and press the starter button.
NOTE: The rear brake lever must be engaged or the engine won’t start.
6. Activate the starter for a maximum of five seconds, releasing the button when the
engine starts. If it doesn’t start, release the starter, wait five seconds, then activate for
another five seconds. Repeat until the engine starts.
7. If the engine slows or stops, position the choke lever half way to allow proper engine
warm up. Vary the RPM slightly with the throttle to aid in warm up.
8. When the engine idles smoothly, push the choke lever all the way to the right.
- Predator 50 2000 ATV Universal ATV 1998 ATV Scrambler 500 Offroad Vehicle Sprotsman 700 Scrambler 50 2003 ATV Predator 90 2005 ATV Sportsman 90 2005 ATV Predator 50 2005 ATV Predator 90 2006 ATV Predator 50 2006 ATV Predator 90 2006 ATV Sportsman 90 Predator 9920872 2007 ATV Outlaw 90 2007 ATV Sportsman 90 Outlaw 9921488