Panasonic DMC-LC50GN - Manual (Page 82)

Playback (advanced)
82
Connecting to a PC
• If you use Windows 98/98SE, install the USB driver and then connect it to the
computer.
• When using Windows Me/2000/XP, Mac OS 9.x and Mac OS X, you do not have to
install the USB driver.
• DMC-LC80/DMC-LC70 is illustrated
below as an example.
A AC adaptor (optional, DMW-AC2)
B USB connection cable
1 Turn the camera on and set the
[USB MODE] according to the OS
you use.
• Set to [PTP] or [Mass Storage].
Refer to “Before Connecting with
USB Connection Cable” on page
80.
• Do not set to [PTP] if you use
Windows 2000 Professional,
Windows Me, Windows 98/98 SE,
Mac OS 9.x. (P81)
2 Connect the camera to a PC via
the USB connection cable
(supplied).
• Align the 2 mark on the USB
connection cable and the 1 mark on
the [DIGITAL] socket.
Depending on the USB mode setting,
the indications on the screen may vary.
Read the page 83.
A
B
LC80GN.book 82 ページ ２００４年６月１７日 木曜日 午前１０時１８分