Panasonic AJ-P VQT0A45 - Manual (Page 99)

– 99 –
Recording
Successive Shooting in Other Cases
If successive shooting is to be performed after the tape has been run, the cassette has been
ejected, or when using a tape which has only been recorded part-way, follow the procedures
outlined below.
1
While monitoring the viewfinder screen, press the PLAY/PAUSE button to play back the tape.
2
At the place where a new recording is to continue on from the existing recording, press the
PLAY/PAUSE (or STOP) button again to stop the tape.
3
Press the RET button on the lens. Preparations for frame-to-frame continuity are made about
two seconds later.
4
Press the VTR START button of the unit or the VTR button of the lens to start recording.
1,2
4 3