Planet Technology MGSW-2402 - Manual (Page 23)

- 23 -
Figure 4-1 The Main Menu of Console Management
4.2.1. Device settings
This menu contains system parameters to display and configure the switch to your network.
Menu items are:
Version (RO): display the firmware version of MGSW-2402
MAC Address (RO): display the MAC Address of MGSW-2402
System Up Time (RO): display the work time of MGSW-2402
System Name: display and change the system name of this Switch
System Location: display and set the location of this Switch
System Contact: display and set the administrator of this Switch
IP Address: display and set the IP address of MGSW-2402
Subnet Mask: display and set the Subnet Mask of MGSW-2402
Default Gateway: display and set the gateway of MGSW-2402
Change User/Password: allow to set the User name and password, default value is root
Console Login Enabled: provide enable or disable Console login MGSW-2402
Quit: logout on MGSW-2402
Figure 4-2: Device settings
4.2.2. Port Settings
Select any one port, the menu contains ten items for port management will shown up as
below:
•
Link (RO): display the link state(UP/DOWN) of per port on MGSW-2402
•
Speed/Duplex (RO): display the Speed/Duplex of the device connect to the port
•
Port Enabled: allow enable or disable the port of MGSW-2402