Philips DC350/37 - Manual (Page 24)

English
25 EN
Set the sleep timer
This unit can switch to standby automatically after a set period of time.
1
When the unit is turned on, press SLEEP repeatedly to select a set period of time
(in minutes).
When the sleep timer is activated, the display shows » .
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off) is displayed.
When the sleep timer is deactivated, » disappears on the display.
Adjust display brightness
1
Press repeatedly BRIGHTNESS CONTROL on the main unit to select:
Bright. •
Dim. •
Off. •
9 Product information
Note
Product information is subject to change without prior notice. •
Specifi cations
Amplifi er
Rated Output Power 2X3W RMS
Frequency Response 125Hz - 16kHz, ±3dB
Signal to Noise Ratio >55dB
Aux Input 0.6 V RMS 10kohm
DC350_37.indd 25 DC350_37.indd 25 1/7/2009 1:59:08 PM 1/7/2009 1:59:08 PM