Philips DC350/37 - Manual (Page 21)

22 EN
Disconnect a device
1
Press and hold for more than 5 seconds
To disconnect, you can also turn off the connected device or move it •
beyond the communication range.
The Bluetooth indicator turns off.
•
Re-connect a previously-connected device
Tip
For a previously-connected iPhone which Bluetooth function is enabled, once it is docked in this •
unit, it re-connects automatically.
1
Turn on the main unit.
2
On the device, set up the Bluetooth connection:
a Enable Bluetooth to search for other Bluetooth devices. (Refer to the
device user manual on how to enable the function.)
b When “ PHILIPS DC350” is recognized and displayed, select it to start to
connect.
3
Wait until the Bluetooth indicator turns on.
Re-connection is completed. »
Receive a phone call
Note
You can receive phone calls through this unit with devices that support the HFP or HSP profi le. •
1
Connect the Bluetooth device. (see ‘Connect with a Bluetooth device’ on page 21 )
2
When a call is received, you hear the incoming call alert tone. Press PAIRING to
accept the call.
To reject the call, press • .
3
Speak into the MIC located on the front panel.
To increase or decrease the volume, press • VOL +/- .
To mute the microphone, press • MUTE . To unmute, press this button again.
To select to hear the audio from the device or from the main unit, press •
PAIRING .
4
Press to end the call.
DC350_37.indd 22 DC350_37.indd 22 1/7/2009 1:59:06 PM 1/7/2009 1:59:06 PM