Philips DC350/37 - Manual (Page 23)

24 EN
Note
Only the latest volume setting for alarm tone works. •
Tip
To view alarm time, press • ALM 1 or ALM 2 repeatedly until alarm time is displayed.
Set alarm mode
1
Adjust the iPhone/iPod-RADIO-BUZZER control on the main unit to select the
source for the alarm.
When the alarm time comes, the selected Phone/iPod, or radio or buzzer »
turns on.
Tip
If iPod/iPhone source is selected but no iPod/iPhone is loaded, the buzzer is selected automatically. •
Activate and deactivate the alarm timer
Note
An alarm can sound only in the standby mode. •
1
Press repeatedly ALM 1 or ALM 2 on the main unit to activate or deactivate the
timer.
If the timer is activated, » is displayed.
If the timer is deactivated, » disappears.
Turn off the alarm tone
During an alarm tone, you can select one of the following to turn it off.
Press • POWER .
The alarm timer remains activated. »
Press
• REPEAT ALARM on the main unit.
The alarm call repeats at 9-minute intervals. »
Press
• ALM 1 or ALM 2 on the main unit.
The alarm timer remains activated. »
DC350_37.indd 24 DC350_37.indd 24 1/7/2009 1:59:08 PM 1/7/2009 1:59:08 PM