Philips WORKIO DP-C262 - Manual (Page 13)

13
Chapter 2 Scan/Email Operations
6
Insert a PCMCIA/PC Card Adapter
with a memory card.
① Push on the slot cover to open it.
② Insert a PCMCIA/PC card into the PCMCIA/
PC Card slot as illustrated. (Label side up)
7
Select “PC Card”.
z Only one storage device can be selected at
a time. When the "PC Card" is selected as a
storage device, the scanned image cannot
be saved to the SD Memory Card or Hard
Disk Drive at the same time.
8
Press the Start key.
The scanned image is saved into the
PCMCIA/PC Card.
The scanned data is saved on the following
directory of the memory card.
z Directory:
\PRIVATE\MEIGROUP\PCC\DI\IMAGE
z The data saved on the memory card in the
PC Card Adapter can be printed by this
machine or another DP-C262 or DP-C322.
For more details, refer to Printing from SD
Memory Card/PC in the Operating
Instructions (for Basic Operations). When
printing PDF data or high-compression PDF
data, install and set up the Memory Card
Print Utility. For details, refer to the Help of
the Memory Cart Print Utility on the
Document Management System CD-ROM.
9
Push the Eject button on the right side
of PCMCIA/PC Card slot, and then
remove the PCMCIA/PC Card
Adapter.
z Do not remove the PCMCIA/PC Card while
the Access Indicator is flashing.
10
Close the Slot Cover.
z When canceling the operation, press the Stop key
on the Control Panel, and then select “Yes” on the
Touch Panel Display.
Eject button