Polycom 52PFL7403D - Manual (Page 9)

ENGLISH
FRANÇAISE
ESP
AÑOL
EN-7
Get started 3.
This section describes how to position and connect your TV, and how
to perform your first-time installation.
3.1 Position the TV
Warning B
Do not insert the power plug into the wall socket before all the •
connections are made.
Large screen TVs are heavy. Two people are required to carry and
•
handle the TV.
Before you move your TV, disconnect the cables to prevent
•
breakage.
Wherever you decide to position your TV, ensure that you always have
easy access to the power cord or plug to disconnect the TV from the
power.
If the TV is mounted on a swivel base or swivel arm, ensure no strain
is placed on the power cord when the TV is swivelled. Strain on the
power cord can loosen connections.
For ideal viewing conditions, position the TV where light does not fall
directly on the screen.
The ideal viewing distance for watching TV is three times its screen size.
Kensington security slot
Your TV is equipped with a Kensington Security Slot at the back of the
TV.
If you connect an anti-theft Kensington lock (not supplied), position the
TV within reach of a permanent object that can be attached to the lock.
3.2 Wall mount the TV
WARNING: Wall mounting of the TV should only be per- B
formed by qualified installers. Koninklijke Philips Electronics
N.V. bears no responsibility for improper mounting that results
in accident or injury.
Step 1 Purchase a VESA-compatible wall bracket
Depending on the size of your TV screen, purchase a wall bracket, bolts
and, optionally, spacers.
TV screen size
(inches) VESA-
compatible
wall bracket
(millimeters) Bolt and
spacer type
(not supplied) Special
instructions
32 Adjustable
300 x 300 4 of M6x10mm
steel bolt
or
4 of M6x50mm
steel bolt with
40mm spacer Adjust bracket to
200 x 300 before
securing to the
TV.
42 or larger Fixed 400 x 400 4 of M8x15mm
steel bolt
or
4 of M8x55mm
steel bolt with
40mm spacer None
Note: D You can purchase a VESA-compatible wall bracket from
www.shopping.philips.com/wallmounts.
Step 2 Remove the TV stand
Note: D Stand may differ according to TV model. These instructions
are only applicable to TV models with mounted stands. If your TV
stand is not mounted, skip to Step 3 Connect cables.
Carefully place the TV face down on a flat, stable surface that is 1.
covered by soft cloth. The cloth should be thick enough to protect
your screen.
Using a cross-head (Phillips) screwdriver (not supplied), unscrew the 2.
four screws that secure the stand to the TV.
Firmly pull the stand from the bottom of the TV, being careful 3.
because the stand is heavy. Place both the stand and screws in a
secure location for future reinstallation.