Polycom 52PFL7403D - Manual (Page 5)

ENGLISH
FRANÇAISE
ESP
AÑOL
EN-3
2007 © Koninklijke Philips Electronics N.V. All
rights reserved. Specifications are subject to change
without notice. Trademarks are the property
of Koninklijke Philips Electronics N.V. or their
respective owners.
Philips reserves the right to change products at any
time without being obliged to adjust earlier supplies
accordingly.
The material in this manual is believed adequate
for the intended use of the system. If the product,
or its individual modules or procedures, are used
for purposes other than those specified herein,
confirmation of their validity and suitability must be
obtained. Philips warrants that the material itself
does not infringe any United States patents. No
further warranty is expressed or implied.
Philips can’t be held responsible neither for any
errors in the content of this document nor for any
problems as a result of the content in this document.
Errors reported to Philips will be adapted and
published on the Philips support website as soon as
possible.
Warranty
No components are user-serviceable. Do not open
or remove covers to the inside of the product.
Repairs may only be done by Philips Service Centers
and official repair shops. Failure to do so shall void
any warranty, stated or implied. Any operation
expressly prohibited in this manual, any adjustments,
or assembly procedures not recommended or
authorised in this manual shall void the warranty.
Pixel characteristics
This LCD product has a high number of color pixels.
Although it has effective pixels of 99,999% or more,
black dots or bright points of light (red, green or
blue) may appear constantly on the screen. This is a
structural property of the display (within common
industry standards) and is not a malfunction.
Open source software
This television contains open source software.
Philips hereby offers to deliver or make available,
upon request, for a charge no more than the cost of
physically performing source distribution, a complete
machine-readable copy of the corresponding source
code on a medium customarily used for software
interchange.
This offer is valid for a period of 3 years after the
date of purchase of this product. To obtain the
source code, write to
Philips Consumer Lifestyle
Development Manager
LoB Mainstream Displays
620A Lorong 1, Toa Payoh
Singapore 319762
Federal Communications Commission Notice
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna. •
Increase the separation between the equipment •
and the receiver.
Connect the equipment into an outlet on a
•
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio or
•
television technician for help.
Modifications
The FCC requires the user to be notified that any
changes or modifications made to this device that
are not expressly approved by Philips Consumer
Lifestyle may void the user’s authority to operate the
equipment.
Cables
Connections to this device must be made with
shielded cables with metallic RFI/EMI connector
hoods to maintain compliance with FCC Rules and
Regulations.
Canadian notice
This Class B digital apparatus meets all requirements
of the Canadian Interference-Causing Equipment
Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte
toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
Copyright
VESA, FDMI and the VESA Mounting Compliant logo
are trademarks of the Video Electronics Standards
Association.
Manufactured under license from Dolby
Laboratories. ‘Dolby’ and the double D symbol are
trademarks of Dolby Laboratories.
Manufactured under license from BBE Sound, Inc.
Licensed by BBE, Inc under one or more of the
following US patents: 5510752,5736897. BBE and
BBE symbol are registered trademarks of BBE Sound
Inc.
® Kensington and Micro Saver are registered US
trademarks of ACCO World Corporation with
issued registrations and pending applications in other
countries throughout the world. All other registered
and unregistered trademarks are the property of
their respective owners.
Portions of this software are copyright © The
FreeType Project (www.freetype.org).
VESA wall mounts
There are many styles and manufacturers of VESA
wall mounts. The type of wall mount you choose will
determine whether spacers are required, and what
length bolts are required for secure mounting. Ensure
that there is enough of a gap between the wall and
the back of the TV set, so that the cables (power
cord, audio cables, and video cables) are not pinched,
stressed, or strained. If the wall mount you choose
has a slim profile and places the TV very close to the
wall, you may need to purchase spacers to ensure
sufficient gap between the TV and the wall.
The bolt length should be 15mm. If you use a spacer,
the bolt length should be spacer length plus 15mm.
For example, if you determine you need to use a
40mm spacer to have enough gap for the cables, the
bolt length you should use would be 55mm (40mm
+ 15mm).