Panasonic DMC-TS4 - Manual (Page 126)

GPS/Sensor
- 126 -
You can specify the period of the recorded altimeter log to display.
Select [Altimeter] on the [GPS/Sensor] menu, and then press [MENU/
SET].
Press 3/4 to select [Display Log], and then press [MENU/SET].
Press 3/4 to select the recording start date, and
press [MENU/SET].
Press 3/4/2/1 to select a date at which to start
the period to display, and press [MENU/SET].
• It will not be displayed, if the date to start and the date to finish
is the same.
∫ About the altitude graph
The altitude graph is displayed with the highest altitude in the log as
the upper limit and the lowest altitude as the lower limit.
Viewing the altimeter log
[W]/[T] Switches between the 12 hour display and the 48 hour display
2/1
Moves the log left and right
•
Move the log in units of 3 hours on the 12 hour display.
• Move the log in units of 12 hours on the 48 hour display.