Planet Technology FNSW-2400S - Manual (Page 18)

PLANET NOVASwitch series 18
Purpose:
Set up the VLAN Group
Default:
No VLAN Group in the device (all ports in VLAN1)
Note: Use Toggle to select VLAN group and “SAVE” to make the
setting take effect.
VLAN setting example 1,
Follow the selection to add port 1 to VLAN2.
Enter Port# >> 1
Toggle Group(1~4) to add/remove (5)Update VLAN setting >>2
Toggle Group(1~4) to add/remove (5)Update VLAN setting >>5
The restult is as below:
PORT 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
VLAN1 X X X X X X X X X X X X X X X X X X X X X X X X
VLAN2 x
VLAN3
VLAN4
(1)Set VLAN(2)Save/Exit(3)Exit>>
Follow the steps again to add the VLAN groups.
VLAN Setting Example 2
Add port 5 to the four VLANs to maks it server for those VLANs.
(1)Set VLAN(2)Save/Exit(3)Exit>> 1
Enter Port# >> 5
Toggle Group(1~4) to add/remove (5)Update VLAN setting >>2
Toggle Group(1~4) to add/remove (5)Update VLAN setting >>3
Toggle Group(1~4) to add/remove (5)Update VLAN setting >>4
Toggle Group(1~4) to add/remove (5)Update VLAN setting >>5
With the setting below, the Switch will separate port 1 to port 4 into 4
VLANs, i.e. those ports can not reach each other. However, they can
still access port 5 without problem.
PORT 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
VLAN1 X X X X X X X X X X X X X X X X X X X X X
VLAN2 X X