PORT Noteworthy Slim Line CD/DVD - Manual (Page 6)

6
PORT-Noteworthy Slim Line CD/DVD
C
HAPTER
1: Hardware installation
1. Turn off the computer and all attached components.
2. Connect the included power supply cable to the rear panel of the device.
Do not yet plug the power supply into the power outlet.
3. Connect the drive connector of the cable to the device.
4. Plug the PCMCIA Cable into any PCMCIA slot of your computer.
5. Now, plug the power supply of the device into a power outlet.
6. Turn on your computer again.
7. You can now begin installing the software.
“Plug&Play” with the PCMCIA Cable for Windows 95/98
To use the PORT DVD drive for Windows 95/98, primary installation must be
carried out only once, according to the following software installation.
The PORT PCMCIA Cable is Plug&Play compatible. If you work with Windows 95/
98, you can attach the PCMCIA while the drive is in use. Your PORT DVD drive
then appears under "My Computer". Likewise, you can remove the PCMCIA
Cable while the drive is in use, by first cancelling it. The PORT DVD drive then
disappears from "My Computer". To cancel the PCMCIA Cable, click on “Start”,
“Settings”, “Control Panel”, “PC Card (PCMCIA)”. Highlight the PCMCIA and
click on “Stop”. The PCMCIA Cable can be removed when the command "You
may now safely remove the card" appears.
1
2
Computer
connection
connection to drive