Poulan C38D - Manual (Page 17)

17
USE THIS SLOT TO AID
IN POSITIONING TEMPLATE
1.) CUT OUT TEMPLATE.
2.) ALIGN TOP AND RIGHT EDGE
OF TEMPLATE AND DRAWBAR.
3.) TAPE IN POSITION.
4.) MARK AND DRILL HOLE #1
5.) ASSEMBLE MOUNTING BRACKET
TO DRAWBAR, USE BRACKET AS
TEMPLATE FOR REMAINING HOLES.
HOLE #1
WIRE LOOP HOLE
OLD
WIRE LOOP HOLE
NEW
USE 11/32" DRILL BIT
USE 9/32" DRILL BIT