Philips SLA5520 User Manual

Page 23

Group

Details

Explanation

Configuration wizard Select security type

WPA

The wireless network is secured (encrypted)
with WPA.
See the user manual of the wireless network
devices for information on how to identify the
security type (encryption type).
WPA, best - WiFi Protected Access

WEP

The wireless network is secured (encrypted)
with WEP.
See the user manual of the wireless network
devices for information on how to identify the
security type (encryption type).
WEP, good - Wired Equivalent Privacy.

None

The wireless network is not secured
(encrypted).
See the user manual of the wireless network
devices for information on how to identify the
security type (encryption type).

Select WPA mode

TKIP

The WPA security type is TKIP.
This option is the default for WPA security.
TKIP - Temporal Key Integrity Protocol

AES

The WPA security type is AES.
See the user manual of the wireless network
devices for information on how to identify the
WPA security type (WPA encryption type).
AES - Advanced Encryption Standard

Select code index

Code 1

1 Select the security code index (WEP key index)

Code 2

2 Press

2 or OK.

Code 3
Code 4
Exit code editing

Only available when Advanced settings - Code management is enabled.

Enter security code

************

Confirm the stored security code (WEP).

(WEP)

When in doubt - Change the security code
(WEP).

Enter the security code (WEP key).
It can be found in the base station (router).
See it's user manual for details.

Enter security code

************

Confirm the stored security code (WPA).

(WPA)

When in doubt - Change the security code
(WPA)

Enter the WPA security code.
It can be found in the base station (router).
See it's user manual for details.

Select active code

Code 1

Select the WEP security code identifier (WEP

Code 2

key index). Range - 1 to 4. It can be found in

Code 3

the base station (router). See it's user manual

Code 4

for details.
WEP security code identifier - If more than one
WEP security code identifier (WEP key) is
entered, the code that is currently active must be
selected (key index)

SLA5520_Eng*.qxd 04-07-2005 13:40 Pagina 23