Philips SLA5520 - Manual (Page 14)

EN
14
Prompt Possible options Your action
Select code index Code 1 1 Select the security code index (WEP key index).
Code 2 2 Press
2 or OK.
Code 3
Code 4
Exit code editing
Make sure to select the code index (WEP key index) that is used by the network.
See Settings menu – Advanced settings – Code management for details.
Enter security code (WEP) ********** 1 Either - select <Change> to enter the security code
(WEP key).
Or - select ******** to confirm the stored security code
(WEP key).
2 Press
2 or OK.
Make sure to enter the security code (WEP key) that is used by the network.
Enter security code (WPA) ********** 1 Either - select <Change> to enter the security code
(WPA key).
Or - select ******** to confirm the stored security code
(WPA key).
2 Press
2 or OK.
Make sure to enter the security code (WPA key) that is used by the network.
Select network settings Automatic (DHCP) 1 Either, used most often – Select Automatic (DHCP)
Manual (Static IP) Or – Select Manual (Static IP). For experienced users.
The product identification number (IP address),
Netmask, Gateway and preferred DNS server must
be entered manually.
2 Press
2 or OK.
Apply settings? Yes 1 Either - Select Yes.
No Or – discard settings – Select No.
2 Press
2 or OK.
Save to profile Profile 1 1 Select the profile you wish to alter.
Profile 2 2 Press
2 or OK.
Profile 3
Different profiles can be used to easily connect to different wireless networks
See Settings menu - Advanced - Profile management for details.
SLA5520_Eng*.qxd 04-07-2005 13:39 Pagina 14